Brake lever

Thought it would be a good idea to give the front brake a full strip down and service and I'm glad I did.  In order to get to the cable section I had to take off the front brake lever and discovered a huge crack through the pivot hole that I'm confident would have failed had I ever needed to use it in anger


Comments

Post a Comment

Popular posts from this blog

Petrol leaks

Image
Had a petrol leak from the right hand carb, and then as soon as that was fixed, the same problem on the left (suspect the balancer hose increased the right carb pressure when the left one was fixed). Once the fuel tap was on petrol was just draining straight out of the overflow. I removed the float bowl, tapped the float pivot bar out with a micro screwdriver and removed the floats. Removed the float valve next and found out covered in sticky gunk and grit (I suspect that it's old fuel that was left standing) on the valve and in its seat. Cleaned the valve and used some 2000 grit to de-gunk the hole so the valve runs smoothly again. Reassembled, problem solved. Exact same problem with the other carb fixed the same.
Read more

Close ups

Image
Some pictures from the first weekend when it stopped raining long enough to go outside Suspension spider seeks new home Always fancied a beemer Hubs, spokes and rims looking a little grubby.  Disc and tyre in surprisingly good condition I remember these Aircooled! Rusty Rockers, now that takes me back Mmm, shiny (once) What was I doing back in 1997? Mmm, oily
Read more