LOUD

After a few weeks of either riding the CBR or bad weather, I'm back on the case with the BMW.

Took the crash bars and exhausts of today to have a look a cleaning them.

Managed to snap one of the bolts in the crash bar brackets which will need drilling and tapping, uugh...  The chroming is crap so I think I'll get them powder coated black.

Exhausts are stainless so should come up nice, but will take a lot of effort.

While it was without it's exhausts I decided to go for a quick ride. It was LOUD, especially as I got stuck at the traffic lights in the railway tunnel near my place!  Did sound awesome though.




Comments

Post a Comment

Popular posts from this blog

Petrol leaks

Image
Had a petrol leak from the right hand carb, and then as soon as that was fixed, the same problem on the left (suspect the balancer hose increased the right carb pressure when the left one was fixed). Once the fuel tap was on petrol was just draining straight out of the overflow. I removed the float bowl, tapped the float pivot bar out with a micro screwdriver and removed the floats. Removed the float valve next and found out covered in sticky gunk and grit (I suspect that it's old fuel that was left standing) on the valve and in its seat. Cleaned the valve and used some 2000 grit to de-gunk the hole so the valve runs smoothly again. Reassembled, problem solved. Exact same problem with the other carb fixed the same.
Read more