First ride
Been out for a ten minute ride. Awesome!
Master cylinder refurb kit
Resolved the leaking master cylinder problem, more on that later.
Popular posts from this blog
Close ups
Some pictures from the first weekend when it stopped raining long enough to go outside Suspension spider seeks new home Always fancied a beemer Hubs, spokes and rims looking a little grubby. Disc and tyre in surprisingly good condition I remember these Aircooled! Rusty Rockers, now that takes me back Mmm, shiny (once) What was I doing back in 1997? Mmm, oily
Petrol leaks
Had a petrol leak from the right hand carb, and then as soon as that was fixed, the same problem on the left (suspect the balancer hose increased the right carb pressure when the left one was fixed). Once the fuel tap was on petrol was just draining straight out of the overflow. I removed the float bowl, tapped the float pivot bar out with a micro screwdriver and removed the floats. Removed the float valve next and found out covered in sticky gunk and grit (I suspect that it's old fuel that was left standing) on the valve and in its seat. Cleaned the valve and used some 2000 grit to de-gunk the hole so the valve runs smoothly again. Reassembled, problem solved. Exact same problem with the other carb fixed the same.
Comments
Post a Comment